FAQ | Label Printers, Disc Title Printer and Stamp Maker
Category : Apps LABEL DESIGN MAKER for Android
How do I connect using WPS in the Client Mode?
Connect using the WPS button of the wireless LAN router/access point.
(1) On the printer, hold down wireless Lan key for at least three seconds.
This puts the printer into simple connection standby, which is indicated by the wireless LAN lamp flashing green, in two quick flash bursts.
(2) Within about the next two minutes, press the WPS (Wi-Fi Protected Setup) button of the wireless LAN router/access point you are using.
(3) When a connection is established, the printer’s wireless LAN lamp lights green.
・ Wireless LAN will turn off if connection cannot be established within two minutes.
(1) On the printer, hold down wireless Lan key for at least three seconds.
This puts the printer into simple connection standby, which is indicated by the wireless LAN lamp flashing green, in two quick flash bursts.
(2) Within about the next two minutes, press the WPS (Wi-Fi Protected Setup) button of the wireless LAN router/access point you are using.
(3) When a connection is established, the printer’s wireless LAN lamp lights green.
・ Wireless LAN will turn off if connection cannot be established within two minutes.
