FAQ | Label Printers, Disc Title Printer and Stamp Maker
Category : Troubleshooting Print
Printing is unclear.(Magnetic Tape)
The cause is as follows.
· The settings are incorrect.
→ Configure the following settings: Tape Size: 24 mm (16 mm), Print Mode: Magnetic Tape.
The LABEL DESIGN MAKER phone app does not support magnetic tape printing.
· The print density setting is not correct.
→ Adjust print density.
reference
Magnetic tape is made using special materials. Because of this, you may not be able to achieve clear printing under low temperatures. Printing on magnetic tape in a location where the temperature is 20°C or higher is recommended. Also make sure that the tape has been in the location long enough to become acclimated.
· The settings are incorrect.
→ Configure the following settings: Tape Size: 24 mm (16 mm), Print Mode: Magnetic Tape.
The LABEL DESIGN MAKER phone app does not support magnetic tape printing.
· The print density setting is not correct.
→ Adjust print density.
reference
Magnetic tape is made using special materials. Because of this, you may not be able to achieve clear printing under low temperatures. Printing on magnetic tape in a location where the temperature is 20°C or higher is recommended. Also make sure that the tape has been in the location long enough to become acclimated.
