Electronic Musical Instrument FAQ ${category} ${subCategory} | CASIO

FAQ | Electronic Musical Instruments

Troubleshooting

Sound and keyboard

When I connect to an external device, noise is generated.

When connecting an external device (PC, Audio interface, Mixer, etc.), noise may be generated if it is wired in a loop. This phenomenon is called "ground loop noise" and not a failure of musical instruments. Noise may be improved by changing the connection method or by using a commercially available "USB Isolator" or "Ground Loop Isolator for Audio".

The sounds from headphones are distorted or too small, but it correctly sounds on speakers.

The multi-pole plug for smartphones is not available. Please use the headphones with three-pole stereo plug. If the sounds from headphones are small even if the volume is maximum, please confirm the impedance of your headphones. High impedance headphones may reduce the volume of sound.

I can only hear a sound from one side of my headphone.

-Ensure that the headphone jack has been inserted all the way into the PHONE jack of the instrument. -Do not use the headphone with Multi-pole plug connectors such as dedicated for iPhone or smartphone. - When connecting the headphone with 3.5mm stereo mini-plug to the instrument with 6.3mm stereo standard jack, please use the adaptor of 6.3 mm stereo plug from 3.5 mm stereo jack. -When the output of your conversion plug was monaural (MONO), please use the stereo conversion plug. Monaural: One black line at the end of the plug Stereo: Two black lines at the end of the plug

No sound is produced from the built-in speaker

Please check the following items: -Is there any headphones or an adapter plug in the PHONES jacks? -Is the power switched on? -Check whether the sound volume is the minimum position. - If there is the speaker ON/OFF function, check whether the speaker is ON position. If you can not solve this problem, contact us about repair.

It does not cut off the sound of speaker even when I connect the headphone.

Some models can sound with headphone and speaker at the same time. Check whether the speaker output is OFF position when connecting PHONE jack.

The Left Side of my Keyboard is not working. How can I fix it?

Turn off the "Fingered Chord" setting. With Fingered chord, keyboards make sounds only when playing the chord properly. The area of chord keyboard is the left of the split point (refer to the user's manual).

[MIDI connection] When using "Piano Roll" of CASIO MUSIC SPACE, the sound is delayed or distorted.

Due to the characteristics of Bluetooth wireless technology, the sound is delayed compared to the cable connection. Depending on the communication environment and the performance of the smart device, the sound may be delayed or distorted in the lesson function of application. In this case, please try the following: - Check " Bluetooth MIDI playback quality" . - "1" and "2" of Step Lesson are played according to how you play the keyboard. As you get used to playing, you may be concerned about delays in sound and operation. In such a case, please use "3" of Step Lesson or normal playback ("OFF" of Step Lesson).

When playing with a Bluetooth connection, the sound is distorted.

With Bluetooth connection, the sound may be distorted depending on the communication environment and the performance of the smart device. If this case, please try the following: - Adjust with the playback quality setting (*) of Bluetooth MIDI of the app. ・ If connected to Wi-Fi, please turn off the Wi-Fi function. - Connect with a cable. * In the playback quality setting of Bluetooth MIDI, please adjust the playback time of the musical instrument by selecting it from five levels of correction values. (Small correction → 1-2-3-4-5 → Large correction)

When I connect to Bluetooth and use Step Lesson, the sound is delayed.

With Bluetooth connection, the sound and operation may be delayed depending on the communication environment and the performance of the smart devices. ・ "1" and "2" of Step Lesson are played according to how you play the keyboard. As you get used to playing, you may be concerned about delays in sound and operation. ・ In such a case, please use "3" of Step Lesson or normal playback ("OFF" of Step Lesson).

I can hear sound from the speaker even when the volume is minimized. Is this a malfunction?

There are some models that leak a little sound when the volume is turned down to the minimum position, but this is not a malfunction.

[MIDI connection] When using the Chordana Play lesson function, the sound is delayed or distorted.

Due to the characteristics of Bluetooth wireless technology, the sound is delayed compared to the cable connection. Depending on the communication environment and the performance of the smart device, the sound may be delayed or distorted in the lesson function of application. In this case, please check how to use the lesson (3.6 Useful Playback Methods for Practice) and MIDI playback quality (2.4 Adjusting Bluetooth MIDI Playback Quality) in the Chordana Play manual .

[Audio connection] The sound is interrupted or the connection is lost.

The possible causes are as follows: (Cause) There is a device such as microwave oven that generates disturbing radio waves nearby. (Countermeasure) Please keep away from the devices that generate disturbing radio waves. (Cause) The distance between the musical instrument and the Bluetooth audio compatible device is long. (Countermeasure) Please bring the device closer to the musical instrument.

Select a location

View all available locations