FAQ | Label Printers, Disc Title Printer and Stamp Maker
Category : Externaldevice Wi-Fi Connection
Shows the MAC address.
Follow the steps below.
The Windows or Mac version of LABEL DESIGN MAKER is required.
1. Connect this product to the computer using the USB cable.
2. Press "ON/Stand-by key" to turn the printer on.
· This will turn on power and cause the power lamp to light green.
3. Start "LABEL DESIGN MAKER".Click "Create a new label".
4. Click "Settings">"Wireless LAN settings".
5. Select "KL-P350W" and click "OK".
6. Click "Access point connect".
7. The MAC address appears.
The Windows or Mac version of LABEL DESIGN MAKER is required.
1. Connect this product to the computer using the USB cable.
2. Press "ON/Stand-by key" to turn the printer on.
· This will turn on power and cause the power lamp to light green.
3. Start "LABEL DESIGN MAKER".Click "Create a new label".
4. Click "Settings">"Wireless LAN settings".
5. Select "KL-P350W" and click "OK".
6. Click "Access point connect".
7. The MAC address appears.
