FAQ | Electronic Musical Instruments
Category : Features and usage MIDI
Multiple MIDI messages are sent by pedal operation.
When you use MIDI output from the instrument with a layer split function, the damper (CC64), sostenuto (CC66), and soft (CC67) pedals of main control change messages are output to the main part (usually 1ch) and to the layer split part channel (2-4ch, etc.). This specification is the purpose of same performance expression as the built-in sound source, when playing by connecting a MIDI sound source to the outside equipment or when importing MIDI data into a PC and using it.
If you don't need pedal messages to multiple MIDI channels, please use the setting to exclude unnecessary messages. If your instrument doesn't support this setting, please exclude it from the settings (ON / OFF function for message reception for each channel, MIDI IN Filter, etc.) of the receiving device (including PC software). For the settings of the receiving equipment, please contact the seller of the equipment.
* The channels of damper, sostenuto, and soft of MIDI messages are different depending on models. (Sent on 1-3ch / 1-4ch, etc.)
* Depending on your sequence software, the messages from multiple channels may be mixed on the same track.
* In addition to the above, a large number of MIDI messages (intermediate pedal values) are sent by a single pedal operation on the models with supported half pedal.
If you don't need pedal messages to multiple MIDI channels, please use the setting to exclude unnecessary messages. If your instrument doesn't support this setting, please exclude it from the settings (ON / OFF function for message reception for each channel, MIDI IN Filter, etc.) of the receiving device (including PC software). For the settings of the receiving equipment, please contact the seller of the equipment.
* The channels of damper, sostenuto, and soft of MIDI messages are different depending on models. (Sent on 1-3ch / 1-4ch, etc.)
* Depending on your sequence software, the messages from multiple channels may be mixed on the same track.
* In addition to the above, a large number of MIDI messages (intermediate pedal values) are sent by a single pedal operation on the models with supported half pedal.
