FAQ | Label Printers, Disc Title Printer and Stamp Maker
Category : Troubleshooting Tape cut
The printer does not cut the tape.
The cause is as follows.
· Tape is jammed in the tape outlet.
→ Turn off power, remove the tape cartridge, and clear the jammed tape.
· The label is short as defi ned by the following.
→ Tape cutting is not performed when the tape length is one of those shown.
After printing, use scissors or some other implement to cut the tape.
MARGINS NARROW Approximately 28mm or less
MARGINS MEDIUM Approximately 35mm or less
MARGINS WIDE Approximately 47mm or less
· The tape cutter is dull.Magnetic Tape is selected for the print mode.
→ Selecting Magnetic Tape automatically disables auto cutting.
After printing on magnetic tape,feed the tape and then use scissors to cut it.
· The selection of "Cut Style" is different.
→ Select [Half Cut/Full Cut] or [Full Cut Only].
· The tape cutter is dull.
→ Contact your original retailer or a CASIO Service Center for replacement.
· Tape is jammed in the tape outlet.
→ Turn off power, remove the tape cartridge, and clear the jammed tape.
· The label is short as defi ned by the following.
→ Tape cutting is not performed when the tape length is one of those shown.
After printing, use scissors or some other implement to cut the tape.
MARGINS NARROW Approximately 28mm or less
MARGINS MEDIUM Approximately 35mm or less
MARGINS WIDE Approximately 47mm or less
· The tape cutter is dull.Magnetic Tape is selected for the print mode.
→ Selecting Magnetic Tape automatically disables auto cutting.
After printing on magnetic tape,feed the tape and then use scissors to cut it.
· The selection of "Cut Style" is different.
→ Select [Half Cut/Full Cut] or [Full Cut Only].
· The tape cutter is dull.
→ Contact your original retailer or a CASIO Service Center for replacement.
